Pip Python Install Mac

Python -m pip install selenium On macOS. To install Python on your Mac, download the latest binary package from the official Python download page. Download: Python for Mac. After installing Python, launch the terminal and type: pip install selenium. Alternatively, you can launch pip using the -m flag while invoking Python: python -m pip install.

The preferred way to install Ansible on a Mac is with pip. The instructions can be found in Installing and upgrading Ansible with pip. If you are running macOS version 10.12 or older, then you should upgrade to the latest pip to connect to the Python Package Index securely.
If necessary, follow the pypiwin32 link to install it manually. It is particularly easy to use pip-Win to install PyInstaller along with the correct version of PyWin32. Pip-Win also provides virtualenv, which makes it simple to maintain multiple different Python interpreters and install packages such as PyInstaller in each of them.
Pip is the preferred installer program. Starting with Python 3.4, it is included by default with the Python binary installers. A virtual environment is a semi-isolated Python environment that allows packages to be installed for use by a particular application, rather than being installed system wide.

Ansible is an agentless automation tool that you install on a control node. From the control node, Ansible manages machines and other devices remotely (by default, over the SSH protocol).

To install Ansible for use at the command line, simply install the Ansible package on one machine (which could easily be a laptop). You do not need to install a database or run any daemons. Ansible can manage an entire fleet of remote machines from that one control node.

Before you install Ansible, review the requirements for a control node. Before you use Ansible, review the requirements for managed nodes (those end devices you want to automate). Control nodes and managed nodes have different minimum requirements.

For your control node (the machine that runs Ansible), you can use any machine with Python 2 (version 2.7) or Python 3 (versions 3.5 and higher) installed. ansible-core 2.11 and Ansible 4.0.0 will make Python 3.8 a soft dependency for the control node, but will function with the aforementioned requirements. ansible-core 2.12 and Ansible 5.0.0 will require Python 3.8 or newer to function on the control node. Starting with ansible-core 2.11, the project will only be packaged for Python 3.8 and newer.This includes Red Hat, Debian, CentOS, macOS, any of the BSDs, and so on.Windows is not supported for the control node, read more about this in Matt Davis’s blog post.

Warning

Please note that some plugins that run on the control node have additional requirements. These requirements should be listed in the plugin documentation.

When choosing a control node, remember that any management system benefits from being run near the machines being managed. If you are using Ansible to manage machines in a cloud, consider using a machine inside that cloud as your control node. In most cases Ansible will perform better from a machine on the cloud than from a machine on the open Internet.

Warning

Ansible 2.11 will make Python 3.8 a soft dependency for the control node, but will function with the aforementioned requirements. Ansible 2.12 will require Python 3.8 or newer to function on the control node. Starting with Ansible 2.11, the project will only be packaged for Python 3.8 and newer.

Although you do not need a daemon on your managed nodes, you do need a way for Ansible to communicate with them. For most managed nodes, Ansible makes a connection over SSH and transfers modules using SFTP. If SSH works but SFTP is not available on some of your managed nodes, you can switch to SCP in ansible.cfg. For any machine or device that can run Python, you also need Python 2 (version 2.6 or later) or Python 3 (version 3.5 or later).

Warning

Please note that some modules have additional requirements that need to be satisfied on the ‘target’ machine (the managed node). These requirements should be listed in the module documentation.

Note

If you have SELinux enabled on remote nodes, you will also want to install libselinux-python on them before using any copy/file/template related functions in Ansible. You can use the yum module or dnf module in Ansible to install this package on remote systems that do not have it.
By default, before the first Python module in a playbook runs on a host, Ansible attempts to discover a suitable Python interpreter on that host. You can override the discovery behavior by setting the ansible_python_interpreter inventory variable to a specific interpreter, and in other ways. See Interpreter Discovery for details.
Ansible’s raw module, and the script module, do not depend on a client side install of Python to run. Technically, you can use Ansible to install a compatible version of Python using the raw module, which then allows you to use everything else. For example, if you need to bootstrap Python 2 onto a RHEL-based system, you can install it as follows:

Starting with version 2.10, Ansible distributes two artifacts: a community package called ansible and a minimalist language and runtime called ansible-core (called ansible-base in version 2.10). Choose the Ansible artifact and version that matches your particular needs.

The ansible package includes the Ansible language and runtime plus a range of community curated Collections. It recreates and expands on the functionality that was included in Ansible 2.9.

You can choose any of the following ways to install the Ansible community package:

Install the latest release with your OS package manager (for Red Hat Enterprise Linux (TM), CentOS, Fedora, Debian, or Ubuntu).
Install with pip (the Python package manager).

Ansible also distributes a minimalist object called ansible-core (or ansible-base in version 2.10). It contains the Ansible language, runtime, and a short list of core modules and other plugins. You can build functionality on top of ansible-core by installing collections from Galaxy, Automation Hub, or any other source.

You can choose any of the following ways to install ansible-core:

Install ansible-core (version 2.11 and greater) or ansible-base (version 2.10) with pip.
Install ansible-core from source from the ansible/ansible GitHub repository to access the development (devel) version to develop or test the latest features.

Note

You should only run ansible-core from devel if you are modifying ansible-core, or trying out features under development. This is a rapidly changing source of code and can become unstable at any point.

Ansible generally creates new releases twice a year. See Release and maintenance for information on release timing and maintenance of older releases.

Ansible can be installed on many systems with pip, the Python package manager.

If pip is not already available on your system, run the following commands to install it:

You may need to perform some additional configuration before you are able to run Ansible. See the Python documentation on installing to the user site for more information.

Once pip is installed, you can install Ansible 1:

In order to use the paramiko connection plugin or modules that require paramiko, install the required module 2:

If you wish to install Ansible globally, run the following commands:

Note

Running pip with sudo will make global changes to the system. Since pip does not coordinate with system package managers, it could make changes to your system that leaves it in an inconsistent or non-functioning state. This is particularly true for macOS. Installing with --user is recommended unless you understand fully the implications of modifying global files on the system.

Note

Older versions of pip default to http://pypi.python.org/simple, which no longer works.Please make sure you have the latest version of pip before installing Ansible.If you have an older version of pip installed, you can upgrade by following pip’s upgrade instructions .

Note

If you have Ansible 2.9 or older installed, you need to use pipuninstallansible first to remove older versions of Ansible before re-installing it.

Ansible can also be installed inside a new or existing virtualenv:

Starting in version 2.10, Ansible is made of two packages. When you upgrade from version 2.9 and older to version 2.10 or later, you need to uninstall the old Ansible version (2.9 or earlier) before upgrading. If you do not uninstall the older version of Ansible, you will see the following message, and no change will be performed:

As explained by the message, to upgrade you must first remove the version of Ansible installed and then install it to the latest version.

Follow these instructions to install the Ansible community package on a variety of operating systems.

Pip Install Python 3.5 Mac

On Fedora:

On RHEL and CentOS:

RPMs for RHEL 7 and RHEL 8 are available from the Ansible Engine repository.

To enable the Ansible Engine repository for RHEL 8, run the following command:

To enable the Ansible Engine repository for RHEL 7, run the following command:

RPMs for currently supported versions of RHEL and CentOS are also available from EPEL.

Note

Since Ansible 2.10 for RHEL is not available at this time, continue to use Ansible 2.9.

Ansible can manage older operating systems that contain Python 2.6 or higher.

Ubuntu builds are available in a PPA here.

To configure the PPA on your machine and install Ansible run these commands:

Note

On older Ubuntu distributions, “software-properties-common” is called “python-software-properties”. You may want to use apt-get instead of apt in older versions. Also, be aware that only newer distributions (in other words, 18.04, 18.10, and so on) have a -u or --update flag, so adjust your script accordingly.

Debian/Ubuntu packages can also be built from the source checkout, run:

Debian users may leverage the same source as the Ubuntu PPA.

Add the following line to /etc/apt/sources.list:

Then run these commands:

Note

This method has been verified with the Trusty sources in Debian Jessie and Stretch but may not be supported in earlier versions. You may want to use apt-get instead of apt in older versions.

To install the newest version, you may need to unmask the Ansible package prior to emerging:

Though Ansible works with both Python 2 and 3 versions, FreeBSD has different packages for each Python version.So to install you can use:

or:

You may also wish to install from ports, run:

You can also choose a specific version, for example ansible25.

Older versions of FreeBSD worked with something like this (substitute for your choice of package manager):

The preferred way to install Ansible on a Mac is with pip.

The instructions can be found in Installing and upgrading Ansible with pip. If you are running macOS version 10.12 or older, then you should upgrade to the latest pip to connect to the Python Package Index securely. It should be noted that pip must be run as a module on macOS, and the linked pip instructions will show you how to do that.

Note

To upgrade from Ansible 2.9 or older to Ansible 3 or later, you must pipuninstallansible first to remove older versions of Ansible before re-installing it.

Note

macOS by default is configured for a small number of file handles, so if you want to use 15 or more forks you’ll need to raise the ulimit with sudolaunchctllimitmaxfilesunlimited. This command can also fix any “Too many open files” errors.

If you are installing on macOS Mavericks (10.9), you may encounter some noise from your compiler. A workaround is to do the following:

Ansible is available for Solaris as SysV package from OpenCSW.

Ansible is available in the Community repository:

The AUR has a PKGBUILD for pulling directly from GitHub called ansible-git.

Also see the Ansible page on the ArchWiki.

Ansible build script is available in the SlackBuilds.org repository.Can be built and installed using sbopkg.

Create queue with Ansible and all dependencies:

Build and install packages from a created queuefile (answer Q for question if sbopkg should use queue or package):

Ansible and its dependencies are available as part of the sysadmin host management bundle:

Update of the software will be managed by the swupd tool:

In Ansible 2.10 and later, the ansible/ansible repository contains the code for basic features and functions, such as copying module code to managed nodes. This code is also known as ansible-core.

New features are added to ansible-core on a branch called devel. If you are testing new features, fixing bugs, or otherwise working with the development team on changes to the core code, you can install and run devel.

Note

You should only install and run the devel branch if you are modifying ansible-core or trying out features under development. This is a rapidly changing source of code and can become unstable at any point.

Note

If you want to use Ansible Tower as the control node, do not install or run the devel branch of Ansible. Use an OS package manager (like apt or yum) or pip to install a stable version.

Pip Python Install Mac Os

If you are running Ansible from source, you may also wish to follow the Ansible GitHub project. We track issues, document bugs, and share feature ideas in this and other related repositories.

For more information on getting involved in the Ansible project, see the Ansible Community Guide. For more information on creating Ansible modules and Collections, see the Developer Guide.

Python Pip Install Mac Os X

You can install the devel branch of ansible-core directly from GitHub with pip:

Note

If you have Ansible 2.9 or older installed, you need to use pipuninstallansible first to remove older versions of Ansible before re-installing it. See Upgrading Ansible with pip for more details.

You can replace devel in the URL mentioned above, with any other branch or tag on GitHub to install older versions of Ansible (prior to ansible-base 2.10.), tagged alpha or beta versions, and release candidates. This installs all of Ansible.

See Running the devel branch from a clone for instructions on how to run ansible-core directly from source.

You can install the devel branch of ansible-core by cloning the GitHub repository:

The default branch is devel.

ansible-core is easy to run from source. You do not need root permissions to use it and there is no software to actually install. No daemons or database setup are required.

Once you have installed the ansible-core repository by cloning, setup the Ansible environment:

Using Bash:

Using Fish:

If you want to suppress spurious warnings/errors, use:

If you do not have pip installed in your version of Python, install it:

Ansible also uses the following Python modules that need to be installed 1:

To update the devel branch of ansible-core on your local machine, use pull-with-rebase so any local changes are replayed.

After you run the the env-setup script, you will be running from the source code. The default inventory file will be /etc/ansible/hosts. You can optionally specify an inventory file (see How to build your inventory) other than /etc/ansible/hosts:

You can read more about the inventory file at How to build your inventory.

Whatever method of installing Ansible you chose, you can test that it is installed correctly with a ping command:

You can also use “sudo make install”.

Packaging Ansible or wanting to build a local package yourself, but don’t want to do a git checkout? Tarballs of releases are available from pypi as https://pypi.python.org/packages/source/a/ansible/ansible-{{VERSION}}.tar.gz. You can make VERSION a variable in your package managing system that you update in one place whenever you package a new version. Alternately, you can download https://pypi.python.org/project/ansible to get the latest stable release.

Note

If you are creating your own Ansible package, you must also download or package ansible-base as part of your Ansible package. You can download it as https://pypi.python.org/packages/source/a/ansible-base/ansible-base-{{VERSION}}.tar.gz.

Pip Python Install Mac Catalina

These releases are also tagged in the git repository with the release version.

As of Ansible 2.9, you can add shell completion of the Ansible command line utilities by installing an optional dependency called argcomplete. argcomplete supports bash, and has limited support for zsh and tcsh.

You can install python-argcomplete from EPEL on Red Hat Enterprise based distributions, and or from the standard OS repositories for many other distributions.

For more information about installation and configuration, see the argcomplete documentation.

On Fedora:

On RHEL and CentOS:

There are 2 ways to configure argcomplete to allow shell completion of the Ansible command line utilities: globally or per command.

Global completion requires bash 4.2.

This will write a bash completion file to a global location. Use --dest to change the location.

If you do not have bash 4.2, you must register each script independently.

You should place the above commands into your shells profile file such as ~/.profile or ~/.bash_profile.

See the argcomplete documentation.

Pip Python Install Mac

#ansible IRC chat channel

1(1,2)

If you have issues with the “pycrypto” package install on macOS, then you may need to try CC=clangsudo-Epipinstallpycrypto.

Python Pip Install Macbook

paramiko was included in Ansible’s requirements.txt prior to 2.8.